Home
About us
Services
Contact
Oat Crimper


Cambron Engineering
3800 Wilder Rd.
Bay City, Michigan 48706-2146

Phone
(989) 684-5890

Fax
(989) 684-5321


"Rollem" Oat Crimper 

Precision Oat Crimper And Corn Cracker

The "Rollem" is a slow speed (38 rpm on the model 800) precision crimper Powered by a Dayton single phase gear motor, the solid cast iron rollers never touch. They are set to .015" apart, thus eliminating noise and dust.

The "Rollem" merely cracks and flattens the oats instead of pulverizing them. The rollers have grooves approximately 1/4" apart with one roller having a special groove in it to grab volunteer corn, beans, etc.

The "Rollem" crimper features all hardened gears and heavy-duty needle roller bearings as well as it's own circuit breaker fuse to protect the motor from overload.

The "Rollem" also features a timer that may be set from 0-60minutes so that the hopper may be filled leaving you free to do something else while it is running. (Models400 and 800)

The "Rollem"  hopper is made of 16 gauge steel with a shut-off valve in the bottom and is removable by pulling a pin.

The frame is 1/4" thick steel plate, held together with flat head screws.

One of the best features of the "Rollem" is the patented cam system that allows you to handle all small grains including corn, by adjusting the roller from .015 to .125 of an inch to maintain uniform crimp.

 

If you have any problems with this site contact  webmaster@cambronengineering.com